三级电影在线观看不卡,欧美亚洲精品午夜福利,偷拍美女厕所撒尿时视频

TECHNYL? A 217 BLACK 1N

Manufacturer: SOLVAY
Produced At: Import/ China
Product Category: TECHNYL PA66
Product No: TECHNYL A 217 BLACK 1NL
Product Quantity: 25KG / BAG
Product Features: Good Flow，Good Mold Release，Heat Stabilized - Inorganic，Metallizable

Product information

TECHNYL? A 217 BLACK 1N

Polyamide 66

Solvay Engineering Plastics

Product Description:

TECHNYL? A 217 Black 1 N is an unreinforced polyamide 66, heat stabilized, standard viscosity, for injection moulding. This grade offers all the primary properties of unreinforced polyamide 66. In addition it has improved resistance to high temperature and it can be used for components which have to withstand mid term temperature stresses. This grade can also be vacuum metalized with very good surface quality and adhesion of the aluminum surface.

Additive	Heat Stabilizer
Features	Good Flow，Good Mold Release，Heat Stabilized - Inorganic，Metallizable
Uses	Automotive Applications，Connectors，Electrical/Electronic Applications
Agency Ratings	EC 1907/2006 (REACH)EN 45545NF F 16-101UL QMFZ2
RoHS Compliance	RoHS Compliant
Appearance	Black，Natural Color
Forms	Pellets
Processing Method	Injection Molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1)
Resin ID (ISO 1043)	PA66

Physical	Dry	Conditioned	Unit	Test Method
Density	1.14	--	g/cm3	ISO 1183/A
Molding Shrinkage				ISO 294-4
Across Flow	1.4	--	%
Flow	1.4	--	%
Water Absorption				ISO 62
73°F, 24 hr	1.3	--	%
Equilibrium, 73°F, 50% RH	2.9	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (73°F)	508000	247000	psi	ISO 527-2/1A
Tensile Strength
Yield, 73°F	12300	--	psi	ASTM D638
Yield, 73°F	13800	8700	psi	ISO 527-2/1A
Break, 73°F	8700	6530	psi	ISO 527-2/1A
Tensile Strain
Yield, 73°F	4.5	10	%	ISO 527-2
Break, 73°F	30	--	%	ASTM D638
Break, 73°F	> 30	> 150	%	ISO 527-2
Flexural Modulus
73°F	508000	--	psi	ASTM D790
73°F	450000	210000	psi	ISO 178
Flexural Strength
73°F	18100	--	psi	ASTM D790
73°F	18900	11600	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength(73°F)	2.1	5.2	ft·lb/in2	ISO 179/1eA
Charpy Unnotched Impact Strength(73°F)	No Break	No Break		ISO 179/1eU
Notched Izod Impact
73°F	1.5	--	ft·lb/in	ASTM D256
73°F	1.9	4.8	ft·lb/in2	ISO 180
Unnotched Izod Impact Strength(73°F)	No Break	No Break		ISO 180/1U

Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load
66 psi, Unannealed	428	--	°F	ASTM D648
66 psi, Unannealed	410	--	°F	ISO 75-2/Bf
264 psi, Unannealed	167	--	°F	ASTM D648, ISO 75-2/Af
Melting Temperature	504	--	°F	ISO 11357-3

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	1.0E+15	1.0E+14	ohms	IEC 60093
Volume Resistivity	1.0E+15	1.0E+16	ohms·cm	IEC 60093
Electric Strength (0.0787 in)	640	560	V/mil	IEC 60243-1
Relative Permittivity	2.90	3.20		IEC 60250
Dissipation Factor	0.030	0.080		IEC 60250
Comparative Tracking Index				IEC 60112
Solution A	600	600	V
Solution B	450	--	V
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating				UL 94
0.06 in	V-2	--
0.13 in	V-2	--
Glow Wire Flammability Index				IEC 60695-2-12
0.031 in	1200	--	°F
0.06 in	1200	--	°F
Glow Wire Ignition Temperature(0.06 in)	1200	--	°F	IEC 60695-2-13
Oxygen Index	26	--	%	ISO 4589-2
French Fire Index	F2	--		NF F16-101
French Smoke Index	I3	--		NF F16-101

Additional Information	Dry	Conditioned	Test Method
European Railways Certifications			EN 45545-2
R22	HL2	--
R23	HL2	--

Injection	Dry	Unit
Drying Temperature	176	°F
Suggested Max Moisture	0.20	%
Rear Temperature	509 to 527	°F
Middle Temperature	518 to 536	°F
Front Temperature	536 to 545	°F
Mold Temperature	140 to 176	°F
Injection Notes
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4h Injection Advice: For unfilled polyamides, Solvay recommends the use of high alloy steel with a low chromium content. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm). In the case of high requirements on surface quality a mould temperature of up to 120°C can be considered. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

久久99亚洲中文字幕,国产一级内射一视频,丰满人妻一区二区三区人妻,成人三级视频在线网站,中文字幕成人熟女视频,亚洲中文字幕av在线男人天堂,国产精品黄页网站在线播放免费,日本免费a^视频一区二区,大香蕉国产成人在线

Products

Products

TECHNYL? A 217 BLACK 1N

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service