TECHNYL? A 217 BLACK 1N
聚酰胺66
產品說明:
TECHNYL? A 217 Black 1 N is an unreinforced polyamide 66, heat stabilized, standard viscosity, for injection moulding. This grade offers all the primary properties of unreinforced polyamide 66. In addition it has improved resistance to high temperature and it can be used for components which have to withstand mid term temperature stresses. This grade can also be vacuum metalized with very good surface quality and adhesion of the aluminum surface.
添加劑 | |
特性 | - Heat Stabilized - Inorganic，電鍍，良好的流動性，脫模性能良好
|
用途 | |
機構評級 | - EC 1907/2006 (REACH)EN 45545NF F 16-101UL QMFZ2
|
RoHS 合規性 | |
外觀 | |
形式 | |
加工方法 | |
多點數據 | |
樹脂ID (ISO 1043) | |
密度 | 1.14 | -- | g/cm3 | ISO 1183/A |
收縮率 |
|
|
| ISO 294-4 |
橫向流量 | 1.4 | -- | % |
|
流量 | 1.4 | -- | % |
|
吸水率 |
|
|
| ISO 62 |
73°F, 24 hr | 1.3 | -- | % |
|
平衡, 73°F, 50% RH | 2.9 | -- | % |
|
拉伸模量 (73°F) | 508000 | 247000 | psi | ISO 527-2/1A |
抗張強度 |
|
|
|
|
屈服, 73°F | 12300 | -- | psi | ASTM D638 |
屈服, 73°F | 13800 | 8700 | psi | ISO 527-2/1A |
斷裂, 73°F | 8700 | 6530 | psi | ISO 527-2/1A |
拉伸應變 |
|
|
|
|
屈服, 73°F | 4.5 | 10 | % | ISO 527-2 |
斷裂, 73°F | 30 | -- | % | ASTM D638 |
斷裂, 73°F | > 30 | > 150 | % | ISO 527-2 |
彎曲模量 |
|
|
|
|
73°F | 508000 | -- | psi | ASTM D790 |
73°F | 450000 | 210000 | psi | ISO 178 |
彎曲強度 |
|
|
|
|
73°F | 18100 | -- | psi | ASTM D790 |
73°F | 18900 | 11600 | psi | ISO 178 |
簡支梁缺口沖擊強度 (73°F) | 2.1 | 5.2 | ft·lb/in2 | ISO 179/1eA |
簡支梁無缺口沖擊強度 (73°F) | 無斷裂 | 無斷裂 |
| ISO 179/1eU |
懸壁梁缺口沖擊強度 |
|
|
|
|
73°F | 1.5 | -- | ft·lb/in | ASTM D256 |
73°F | 1.9 | 4.8 | ft·lb/in2 | ISO 180 |
無缺口伊佐德沖擊強度 (73°F) | 無斷裂 | 無斷裂 |
| ISO 180/1U |
載荷下熱變形溫度 |
|
|
|
|
66 psi, 未退火 | 428 | -- | °F | ASTM D648 |
66 psi, 未退火 | 410 | -- | °F | ISO 75-2/Bf |
264 psi, 未退火 | 167 | -- | °F | ASTM D648, ISO 75-2/Af |
熔融溫度 | 504 | -- | °F | ISO 11357-3 |
表面電阻率 | 1.0E+15 | 1.0E+14 | ohms | IEC 60093 |
體積電阻率 | 1.0E+15 | 1.0E+16 | ohms·cm | IEC 60093 |
介電強度 (0.0787 in) | 640 | 560 | V/mil | IEC 60243-1 |
相對電容率 | 2.90 | 3.20 |
| IEC 60250 |
耗散因數 | 0.030 | 0.080 |
| IEC 60250 |
漏電起痕指數 |
|
|
| IEC 60112 |
解決方案 A | 600 | 600 | V |
|
解決方案 B | 450 | -- | V |
|
UL 阻燃等級 |
|
|
| UL 94 |
0.06 in | V-2 | -- |
|
|
0.13 in | V-2 | -- |
|
|
灼熱絲易燃指數 |
|
|
| IEC 60695-2-12 |
0.031 in | 1200 | -- | °F |
|
0.06 in | 1200 | -- | °F |
|
熱燈絲點火溫度 (0.06 in) | 1200 | -- | °F | IEC 60695-2-13 |
極限氧指數 | 26 | -- | % | ISO 4589-2 |
French Fire Index | F2 | -- |
| NF F16-101 |
French Smoke Index | I3 | -- |
| NF F16-101 |
European Railways Certifications |
|
|
| EN 45545-2 |
R22 | HL2 | -- |
|
|
R23 | HL2 | -- |
|
|
干燥溫度 | 176 | °F |
|
建議的最大水分含量 | 0.20 | % |
|
料筒后部溫度 | 509 到 527 | °F |
|
料筒中部溫度 | 518 到 536 | °F |
|
料筒前部溫度 | 536 到 545 | °F |
|
模具溫度 | 140 到 176 | °F |
|
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4h Injection Advice: |
如需索爾維（SOLVAY）原廠物性表及相關文件，請聯系我們工作人員，謝謝！
