VESTAMID? L L-R9-MHI
聚酰胺12
Permanently antistatic and electrically conductive VESTAMID? polyamide 12 compounds
Characterization: medium viscosity, heat and light-stabilized, increased cold impact strength, with processing aid; especially designed for parts meeting EN 50014
Applications: antistatic and electrically conductive injection molded or extruded parts for use in areas prone to explosion such as coal mining and other industries, e.g., housings for explosion-protected measurement, fans for electric motors, housings for electric switches, chair castors, loudspeaker boxes, telephone and radio equipment, profiles for assembly lines, also with electric shock protection
In general, it can be said that long-chain, semi-crystalline polyamides absorb little water, are resistant to polar and non-polar solvents, exhibit low creep behavior and high impact resistance and can be used in a wide temperature range. Virtually no other polymer material in this price range exhibits these properties.
添加劑 | |
特性 | Excellent Processability、半結晶、導電、低摩擦系數、高 ESCR（抗應力開裂）、光穩定、減震、 降噪、抗靜電性、抗溶劑性、抗撞擊性高、良好耐磨損性、耐低溫沖擊、耐疲勞性能、耐燃油性、 耐油性能、耐油脂性能、熱穩定性、食品接觸的合規性、吸水低或不吸水、中等粘性
|
用途 | |
機構評級 | - FDA 21 CFR 177.1500、歐洲 10/1/2011 12:00:00 AM
|
外觀 | |
形式 | |
加工方法 | |
密度 | 1.08 | g/cm3 | ISO 1183 |
收縮率 |
|
| ISO 294-4 |
橫向流量 | 1.5 | % |
|
流量 | 1.4 | % |
|
吸水率 |
|
| ISO 62 |
飽和, 73°F | 1.5 | % |
|
平衡, 73°F, 50% RH | 0.70 | % |
|
拉伸模量 | 203000 | psi | ISO 527-2 |
拉伸應力 (屈服) | 5370 | psi | ISO 527-2 |
拉伸應變 |
|
| ISO 527-2 |
屈服 | 6.0 | % |
|
斷裂 | > 50 | % |
|
簡支梁缺口沖擊強度 |
|
| ISO 179/1eA |
-22°F, 完全斷裂 | 5.7 | ft·lb/in2 |
|
73°F, 局部斷裂 | 29 | ft·lb/in2 |
|
簡支梁無缺口沖擊強度 |
|
| ISO 179/1eU |
-22°F | 無斷裂 |
|
|
73°F | 無斷裂 |
|
|
熱變形溫度 |
|
|
|
66 psi, 未退火 | 266 | °F | ISO 75-2/B |
264 psi, 未退火 | 122 | °F | ISO 75-2/A |
維卡軟化溫度 |
|
|
|
-- | 347 | °F | ISO 306/A |
-- | 284 | °F | ISO 306/B |
熔融溫度 3 | 352 | °F | ISO 11357-3 |
線形熱膨脹系數 - 流動 (73 到 131°F) | 9.4E-5 | in/in/°F | ISO 11359-2 |
體積電阻率 | 1.0E+9 | ohms·cm | IEC 60093 |
Insulation Resistance | 1.0E+9 | ohms | IEC 60167 |
可燃性等級 |
|
| IEC 60695-11-10, -20 |
0.06 in | HB |
|
|
0.13 in | HB |
|
|
ISO Shortname | PA12-HIP, MHZ, 16-010 |
| ISO 1874 |
如需德固賽原廠物性表及相關文件，請聯系我們工作人員，謝謝！
